Great user manuals database on
Replacing the Palm-Rest Assembly
1.
Follow the instructions in
.
2.
Connect the control-strip cable to the system-board connector.
3.
Slide the touch-pad cable into the system-board connector and press down on the connector latch to secure the cable.
4.
Align the three tabs on the palm-rest assembly with the slots on the top cover and gently snap the palm-rest assembly into place.
5.
Close the display and turn the computer over.
6.
Replace the seven screws that secure the palm-rest assembly to the base cover.
7.
8.
9.
Replace the memory module(s) (see
Replacing the Memory Module(s)
).
10.
Replace the battery (see
CAUTION:
Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may
result in damage to the computer.