Table 15. System setup options—Pre-boot Behavior menu
Pre-boot Behavior
Adapter Warnings
Enable Dock Warning Messages
Enables or disables dock warning messages.
Default: ON
Warnings and Errors
Warnings and Errors
Selects an action on encountering a warning or error during boot.
Default: Prompt on Warnings and Errors. Stop, prompt, and wait for user input
when warnings or errors are detected.
NOTE:
Errors deemed critical to the operation of the computer hardware will
always halt the computer.
USB-C Warnings
Enable Dock Warning Messages
Enables or disables dock warning messages.
Default: ON
Fastboot
Fastboot
Configures the speed of the UEFI boot process.
Default: Thorough. Performs complete hardware and configuration initialization
during boot.
Extend BIOS POST Time
Extend BIOS POST Time
Configures the BIOS POST (Power-On Self-Test) load time.
Default: 0 seconds
MAC Address Pass-Through
MAC Address Pass-Through
Replaces the external NIC MAC address (in a supported dock or dongle) with the
selected MAC address from the computer.
Default: System Unique MAC Address.
Sign of Life
Early Logo Display
Display Logo Sign of Life.
Default: ON
Early Keyboard Backlight
Keyboard Backlight Sign of Life.
Default: ON
Mouse/Touchpad
Mouse/Touchpad
Defines how the computer handles mouse and touchpad input.
Default: Touchpad and PS/2 Mouse. Leave the integrated touchpad enabled
when an external PS/2 mouse is present.
Table 16. System setup options—Virtualization menu
Virtualization
Intel Virtualization Technology
Enable Intel Virtualization Technology (VT) Enables the computer to run a virtual machine monitor (VMM).
Default: ON
VT for Direct I/O
System setup
55
Содержание P117G
