Dell P102F, Руководство по обслуживанию

Страница: 22 / 93

3. Follow the procedure in after working inside your computer .
Solid-state drive
Removing the M.2 2280 solid-state drive - SSD-1
Prerequisites
1. Follow the procedure in before working inside your computer .
2. Remove the base cover .
3. Remove the battery .
NOTE: Depending on the configuration ordered, your computer may support a 2230 solid-state drive or a 2280 solid-state
drive in M.2 slot one.
NOTE: M.2 slot two supports one PCIe Gen3 x4 NVMe or SATA solid-state drive (M.2 2230 or M.2 2280) or one Intel
Optane memory H10 with solid state storage.
About this task
The figure indicates the location of the M.2 2280 solid-state drive and provides a visual representation of the removal procedure
from slot one.
Steps
1. Remove the single screw (M2x3) that secures the solid-state drive to the palm-rest and keyboard assembly.
2. Slide and remove the solid-state drive module from the solid-state drive slot on the system board.
Installing the M.2 2280 solid-state drive - SSD-1
Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
NOTE: Depending on the configuration ordered, your computer may support a 2230 solid-state drive or a 2280 solid-state
drive in M.2 slot one.
22 Disassembly and reassembly