Dell OptiPlex Gn+, Руководство по обслуживанию

Страница: 63 / 139

Removing and Replacing Parts on the Low-Profile Chassis 4-5
E
ject, Power, and Reset Buttons
Figure 4-4. Eject, Power, and Reset Button Removal
To remove the eject, power, and reset buttons, follow these steps:
1. Lay the computer cover upside down on a flat work surface, with the
back of the cover facing you.
2. To remove the 3.5-inch diskette-drive eject button, pull gently on the
plastic part of the button until it comes free.
3. To remove the power button or the reset button, use a small screw-
driver and push in the two or three plastic clips that hold the button to
the computer cover.
When these clips are released, the button comes free from the front panel of
the cover.
power button
reset button
eject button
computer cover
(upside down)