Dell OptiPlex 990 Mini-Tower Скачать руководство пользователя страница 80

Страница: 80 / 97

Hard-disk drive controller failure

Description

The hard drive failed initialization.

Hard-disk drive failure

Description

The hard drive failed initialization.

Hard-disk drive read failure

Description

The hard drive failed initialization.

Invalid configuration information-please run SETUP program

Description The computer configuration information does not match the hardware

configuration.

Invalid Memory configuration, please populate DIMM1

Description DIMM1 slot does not recognize a memory module. The module should be

re-seated or installed.

Keyboard failure

Description A cable or connector may be loose, or the keyboard or keyboard/mouse

controller may be faulty.

Memory address line failure at address, read value expecting

value

Description A memory module may be faulty or improperly seated. Reinstall the

memory modules and, if necessary, replace them.

Содержание OptiPlex 990 Mini-Tower


































































































Результаты поиска

Содержание OptiPlex 990 Mini-Tower

Отзывы:

Dell OptiPlex 990 Mini-Tower, Руководство по обслуживанию, Страница: 80 / 97

Результаты поиска

Содержание OptiPlex 990 Mini-Tower

Отзывы: