Dell OptiPlex 990 Mini-Tower Скачать руководство пользователя страница 78

Страница: 78 / 97

Alert! Security override Jumper is installed.

Description The MFG_MODE jumper has been set and AMT Management features are

disabled until it is removed.

Attachment failed to respond

Description The floppy or hard drive controller cannot send data to the associated

drive.

Bad command or file name

Description Ensure that you have spelled the command correctly, put spaces in the

proper place, and used the correct pathname.

Bad error-correction code (ECC) on disk read

Description The floppy or hard drive controller detected an uncorrectable read error.

Controller has failed

Description

The hard drive or the associated controller is defective.

Data error

Description The floppy or hard drive cannot read the data. For the Windows operating

system, run the chkdsk utility to check the file structure of the floppy or
hard drive. For any other operating system, run the appropriate
corresponding utility.

Содержание OptiPlex 990 Mini-Tower


































































































Результаты поиска

Содержание OptiPlex 990 Mini-Tower

Отзывы:

Похожие инструкции для OptiPlex 990 Mini-Tower

Бренды по названию

Популярные бренды

Dell OptiPlex 990 Mini-Tower, Руководство по обслуживанию

Результаты поиска

Содержание OptiPlex 990 Mini-Tower

Отзывы:

Похожие инструкции для OptiPlex 990 Mini-Tower

Бренды по названию

Популярные бренды