manualshive.com logo in svg

Dell OptiPlex 790, Руководство по обслуживанию, Страница: 86 / 103

Поделиться
Скачать
Dell OptiPlex 790 Скачать руководство пользователя страница 86

Hard-disk drive controller failure

Description

The hard drive failed initialization.

Hard-disk drive failure

Description

The hard drive failed initialization.

Hard-disk drive read failure

Description

The hard drive failed initialization.

Invalid configuration information-please run SETUP program

Description The computer configuration information does not match the hardware 

configuration.

Invalid Memory configuration, please populate DIMM1

Description DIMM1 slot does not recognize a memory module. The module should be 

re-seated or installed.

Keyboard failure

Description A cable or connector may be loose, or the keyboard or keyboard/mouse 

controller may be faulty.

Memory address line failure at address, read value expecting 

value

Description A memory module may be faulty or improperly seated. Reinstall the 

memory modules and, if necessary, replace them.

86

Содержание OptiPlex 790








































































































Отзывы:

Нет отзывов