Dell OptiPlex 7090 Small Form Factor, Руководство по обслуживанию

Страница: 27 / 90

Steps
1. Align the notch on the solid-state drive with the tab on the M.2 card slot.
2. Slide the solid-state drive into the M.2 card slot on the system board.
3. Replace the screw (M2x3) that secures the solid-state drive to the system board.
4. Re-route the SATA cables through the cable management tab.
5. Replace the two screws (6x32) to secure the metal bracket to the computer.
Next steps
1. Install the 2.5/3.5-inch hard-drive caddy .
2. Install the front bezel .
3. Install the side cover .
4. Follow the procedure in after working inside your computer .
Removing and installing components 27