Dell OptiPlex 5080 Tower, Руководство по обслуживанию

Страница: 63 / 77

Steps
1. To remove the dummy metal bracket, insert a flathead screwdriver in the hole of the bracket, push the bracket to release the bracket,
and then lift the bracket out from the system.
2. Insert the optional I/O module (Type-C/HDMI/VGA/DP/Serial) into its slot from the inside of your computer.
3. Connect the I/O cable to the connector on the system board .
4. Replace the two (M3X3) screws to secure the optional I/O module to the system.
Next steps
1. Install the fan duct .
2. Install the front bezel .
3. Install the side cover .
4. Follow the procedure in after working inside your computer .
Disassembly and reassembly 63