Dell OptiPlex 5080 Tower, Руководство по обслуживанию

Страница: 57 / 77

Steps
1. Slide the power-supply unit into the chassis until the securing tab snaps into position.
2. Replace the three (#6-32) screws to secure the power-supply unit to the chassis.
3. Route the power cable through the routing guides on the chassis and connect the power cables to their respective connectors on the
system board.
Next steps
1. Install the fan duct .
2. Install the side cover .
3. Follow the procedure in after working inside your computer .
Intrusion switch
Removing the intrusion switch
Prerequisites
1. Follow the procedure in before working inside your computer .
2. Remove the side cover .
3. Remove the fan duct .
About this task
The following images indicate the location of the intrusion switch and provides a visual representation of the removal procedure.
Disassembly and reassembly 57