Dell OptiPlex 5080 Tower, Руководство по обслуживанию

Страница: 30 / 77

Steps
1. Align the notch on the solid-state drive with the tab on the solid-state drive connector.
2. Insert the solid-state drive at a 45-degree angle into the slot on the system board.
3. Replace the screw (M2x3.5) to secure the M.2 2280 solid-state drive to the system board.
Next steps
1. Install the fan duct .
2. Install the side cover .
3. Follow the procedure in after working inside your computer .
Memory modules
Removing the memory modules
Prerequisites
1. Follow the procedure in before working inside your computer .
2. Remove the side cover .
3. Remove the fan duct .
About this task
The following images indicate the location of the memory modules and provide a visual representation of the removal procedure.
30 Disassembly and reassembly