Dell OptiPlex 5055 Tower Скачать руководство пользователя страница 59

Страница: 59 / 80

Option

Description

•

COM4 (Disabled by default)

SATA Operation

Allows you to configure the operating mode of the integrated hard drive controller.

•

Disabled = The SATA controllers are hidden

•

AHCI (Enabled by default)

•

RAID ON = SATA is configured to support RAID mode (Disabled by default)

Drives

Allows you to enable or disable the various drives on-board:

•

SATA-0 (enabled by default)

•

SATA-1

•

SATA-2

•

SATA-3

•

M.2 PCIe SSD-0

Smart Reporting

This field controls whether hard drive errors for integrated drives are reported during system startup.
The

Enable Smart Reporting option

is disabled by default.

USB Configuration

Allows you to enable or disable the integrated USB controller for:

•

Enable Boot Support

•

Enable Front USB Ports

•

Enable Rear USB Ports

All the options are enabled by default.

USB PowerShare

This option allows you to charge the external devices, such as mobile phones, music player. This
option is disabled by default.

Audio

Allows you to enable or disable the integrated audio controller. The option

Enable Audio

is selected by

default.

•

Enable Microphone

•

Enable Audio

•

Enable Internal Speaker

The options are selected by default.

Miscellaneous Devices

Allows you to enable or disable the Miscellaneous Devices. The option are

•

Enable Secure Digital (SD) Card (Enabled by default)

•

Secure Digital (SD) Card Read-Only mode

Table 7. Video

Option

Description

Multi-Display

The option is selected by default.

Primary Display

Allows you to select the primary display when multiple controllers are available in the system.

•

Auto (default)

•

Integrated Graphics

NOTE:

If you do not select Auto, the on-board graphics device will be present and enabled.

System setup

Содержание OptiPlex 5055 Tower

















































































Результаты поиска

Содержание OptiPlex 5055 Tower

Отзывы:

Похожие инструкции для OptiPlex 5055 Tower

Бренды по названию

Популярные бренды

Dell OptiPlex 5055 Tower, Руководство пользователя

Результаты поиска

Содержание OptiPlex 5055 Tower

Отзывы:

Похожие инструкции для OptiPlex 5055 Tower

Бренды по названию

Популярные бренды