Dell OptiPlex 3050 Скачать руководство пользователя страница 54

Страница: 54 / 66

Table 13. Power Management

Option

Description

AC Behavior

Allows you to enable or disable the computer from turning on automatically when an AC adapter
is connected.

•

Power Off (Default)

•

Power On

•

Last Power State

Auto On Time

Allows you to set the time at which the computer must turn on automatically. The options are:

•

Disabled (Default)

•

Every Day

•

Weekdays

•

Select Days

Deep Sleep Control

Allows you to aggressive the system is at conserving power while Shut down (S5) or in
Hybernate (S4) mode.

•

Disabled (Default)

•

Enabled in S5 only

•

Enabled in S4 and S5

Fan Control Override

This field determines the speed of the system fan.

•

Fan Control Override (Disabled)

USB Wake Support

Allows you to enable USB devices to wake the system from Standby.

NOTE:

This feature is only functional when the AC power adapter is connected. If the

AC power adapter is removed during Standby, the system setup will remove power
from all of the USB ports to conserve battery power.

•

Enable USB Wake Support

Default Setting: The option is disabled.

Wake on LAN/WLAN

Allows you to enable or disable the feature that powers on the computer from the Off state
when triggered by a LAN signal.

•

Disabled: This option is enabled by default

•

LAN Only

•

WLAN Only

•

LAN or WLAN

•

LAN with PXE Boot

Block Sleep

Allows you to block entering to sleep (S3 state) in OS environment.

Default Setting: The option is disabled

Intel Ready Mode

Allows you to replace sleep S3 to put your PC in an always aware state that allows the user to
interact with it even while the PC is asleep

•

Enable Intel Ready Mode: The option is disabled.

System setup

Содержание OptiPlex 3050



































































Результаты поиска

Содержание OptiPlex 3050

Отзывы:

Похожие инструкции для OptiPlex 3050

Бренды по названию

Популярные бренды

Dell OptiPlex 3050, Руководство пользователя

Результаты поиска

Содержание OptiPlex 3050

Отзывы:

Похожие инструкции для OptiPlex 3050

Бренды по названию

Популярные бренды