Dell OptiPlex 3050 Скачать руководство пользователя страница 49

Страница: 49 / 66

Option

Description

•

Memory Information: Displays Memory Installed, Memory Available, Memory Speed, Memory Channels Mode,

Memory Technology, DIMM A Size, DIMM B Size,

•

PCI Information: Slot1, Slot2

•

Processor Information: Displays Processor Type, Core Count, Processor ID, Current Clock Speed, Minimum

Clock Speed, Maximum Clock Speed, Processor L2 Cache, Processor L3 Cache, HT Capable, and 64-Bit

Technology.

•

Device Information: Displays Primary Hard Drive, ODD Device, LOM MAC Address, Video Controller, Video

BIOS Version, Video Memory, Panel Type, Native Resolution, Audio Controller, Wi-Fi Device, Bluetooth Device.

Boot Sequence

Allows you to change the order in which the computer
attempts to find an operating system. The option is:

•

Windows Boot Manager

By default, all the options are checked. You can also

deselect any option or change the boot order.

Boot List Option

Allows you to change the boot list option.

•

Legacy

•

UEFI

Advanced Boot
Options

This option allows you the legacy option ROMs to load. By default, the

Enable Legacy Option ROMs

is disabled.

UEFI Boot Path
Security

This option allows you control whether the system prompts the user to enter the Admin password when booting
a UEFI boot path from the F12 boot menu. The options are:

•

Always, Except Internal HDD (Enabled)

•

Always

•

Never

Date/Time

Allows you to change the date and time.

Table 8. System Configuration

Option

Description

Integrated NIC

Allows you to configure the integrated network controller. The options are:

•

Disabled

•

Enabled

•

Enabled w/PXE: (Enabled by default)

Serial Port

Allows you to configure built-in serial port operates.

•

Disabled

•

COM1: (Enabled by default)

•

COM2

•

COM3

•

COM4

SATA Operation

Allows you to configure the internal SATA hard-drive controller. The options are:

•

Disabled

•

AHCI

•

RAID On: (Enabled by default)

Drives

Allows you to configure the SATA drives on board. All drives are enabled by default. The options
are:

System setup

Содержание OptiPlex 3050



































































Результаты поиска

Содержание OptiPlex 3050

Отзывы:

Похожие инструкции для OptiPlex 3050

Бренды по названию

Популярные бренды

Dell OptiPlex 3050, Руководство пользователя

Результаты поиска

Содержание OptiPlex 3050

Отзывы:

Похожие инструкции для OptiPlex 3050

Бренды по названию

Популярные бренды