Dell OpenManage HIP 3.2, Руководство пользователя

Страница: 47 / 75

Installation and Upgrade Procedures 2-23
13. Edit the name of the MIF being sent from default.mif in the dialog box, if
necessary.
14. Click OK .
To send the MIF from the Dell managed node to the management station, perform
the following steps:
1. Map a drive to the management station’s sms_shr directory (i.e., f:\sms_shr ).
2. At an MS-DOS
®
prompt, change to the x86.bin directory, type
invwin32/f/e
and press <Enter>.
When the command sent to the MIF has been registered, the following message
appears:
-SMS 100%-
It may take a few minutes for the MIF to be sent across the network to the man-
agement station.
Dell MIF information appears in the Personal Computer Properties box of the
server name for the Dell node inside the SMS Administrator.
/'606XSSRUWIRU600RQ
'HOO3RZHU(GJH6HUYHUV
The SMM card is supported by the LDSM Console and the LDSM/HIP 2.2 agents on
the PowerEdge 6100 server. Console support is available only on supported manage-
ment station operating-system platforms running Windows NT 3.51 or 4.0. Additional
vendor support is provided by LDSM/HIP 2.2.
The LDSM/HIP 2.2 CD is shipped with the SMM card supplied with PowerEdge 6100
systems. If you need to use the SMM card for out-of-band management support, you
must install the LDSM/HIP 2.2 agents on the PowerEdge 6100 server and install the
LDSM Console components on the HP OpenView NNM SE management station. The
LDSM Console is a launchable application available under the NNM SE
Tools menu.
In-band management information for the PowerEdge 6100 servers with the LDSM/
HIP 2.2 agents is provided through the Dell OpenManage Server Console on
Dell-discovered servers.
For out-of-band management, you must run the SMM features in the LDSM Console
application as follows:
1. Launch the LDSM Console from the Tools—>Dell—>LDSM Console on the
toolbar.
The LDSM Console window appears.
2. Click the SMM icon.