Dell OpenManage HIP 3.2, Руководство пользователя

Страница: 30 / 75

2-6 HP OpenView NNM SE 1.2 With Dell OpenManage HIP 3.2 User’s Guide
In this command line,
public
is the SNMP trap community name configured for the
SNMP service (the community name is case-sensitive).
NOTES: You must ensure that snmp.nlm is not automatically loaded by another .nlm
file because the parameters must be specified for
snmp.nlm
when it is first loaded.
If you are using Netware 4.10 or 4.11, SNMP is usually configured and implemented
by loading
inetcfg.nlm (the Internetworking Configuration NetWare Loadable Module
[NLM]). See your Netware 4.1x user's guide for more information.
To install a Dell managed node for NetWare, use the following procedure:
1. Map a drive to the sys volume of the NetWare server from a Windows NT
system.
2. Insert the HP OpenView Network Node Manager Special Edition CD into your
CD-ROM drive.
There is a short delay due to setup initialization.
On systems using the Windows NT 3.51 operating system, run the setup.exe
file in the root directory of the CD.
The Dell OpenManage Software Installation window appears with three
options:
‡
Install Managed Node — Installs a Dell managed node onto the Dell server.
This node is the Dell HIP, which consists of services, files, and drivers to sup-
port management of Dell’s servers and selected hardware.
‡
Install Dell NNM SE — Installs NNM SE along with Dell system compo-
nents on the management station, which provide management capabilities
for Dell systems.
‡
Exit — Exits installer.
3. Click Install Managed Node .
The Welcome screen appears.
4. Click Next .
The Dell End User License Agreement appears.
5. Click Yes to continue or No to cancel the installation.
If you clicked Yes , the User Information window appears.
6. Enter your name and company name, and click Next .
The Setup Options window appears.
7. Click Dell Managed NetWare Node .
The Choose Destination Location window appears.