PowerVault (Dell MD1400 - 16TB) Setup Guide
Series 6 - R740xd (Hybrid)
The following figure shows Series 6 - R740 hybrid host Port 0 connected to a PowerVault's
Port 1 in top row of ports using a mini-to-mini SAS cable.
The PERC H840 card for the R740 is installed in slot #4
inverted (upside down)
in this slot.
This means that:
l
Port 0 is on the right and Port 1 is on the left on the R740 Hybrid
.
l
You must attach each cable to the R740 with the connector's blue tab on the bottom
as shown in the following picture
.
l
You must attach the other end the cable to the PowerVault with the connector's blue tab
on the top.
l
You know if the cable is properly connected when you hear a click as the cable locks into
place and see the green port light illuminate on the R740.
Install PowerVault without Encryption
20
