PowerVault (Dell MD1400 - 16TB) Setup Guide
Introduction
The following table contains the summarized installation instructions for different deployments,
and detailed procedures are in individual subsections. The deployment scenarios are:
l
Multiple PowerVaults in a Concentrator, (Network) Decoder, Log Decoder, and Archiver
deployment.
l
A single PowerVault in a Hybrid deployment.
Attach and Configure a PowerVault without Encryption
This table summarizes the steps you must complete to attach and configure a PowerVault
without encryption. The scenarios are shown in detail in the topics following immediately the
table.
NetWitness Platform 11.5 and Later
Deployment
Scenario
Tasks
Concentrator, Archiver,
Decoder, and Log
Decoder (Multiple
PowerVaults)
1. Connect the PowerVaults to the physical host before powering
on the physical host as described in
Concentrator, Archiver, Decoder, or Log Decoder Physical Host
.
2. Follow the instructions in the
Storage Guide for NetWitness
Platform Version 11.5 and Later
to allocate storage for your
hardware.
Hybrid
1. Connect the PowerVault to the physical host before powering
on the physical host as described in
.
2. Follow the instructions in the
Storage Guide for NetWitness
Platform Version 11.5 and Later
to allocate storage for your
hardware.
Install PowerVault without Encryption
16
