Dell M1330 - XPS - Core 2 Duo 1.83 GHz, Руководство пользователя

Страница: 108 / 202

108
Troubleshooting
R UN THE D ELL D IAGNOSTICS —
If all tests run successfully, the error condition
is related to a software problem (see "Dell Diagnostics" on page 87).
Memory Problems
Fill out the "Diagnostics Checklist" on page 163 as you complete these checks.
CAUTION:
Before you begin any of the procedures in this section, follow the
safety instructions in the Product Information Guide .
I
F YOU RECEIVE AN INSUFFICIENT MEMORY MESSAGE
—
• Save and close any open files and exit any open programs you are not using
to see if that resolves the problem.
• See the software documentation for minimum memory requirements. If
necessary, install additional memory
(see "Memory" on page 137) .
• Reseat the memory modules to ensure that your computer is successfully
communicating with the memory
(see "Memory" on page 137) .
• Run the Dell Diagnostics (see "Dell Diagnostics" on page 87) .
I F YOU EXPERIENCE OTHER MEMORY PROBLEMS —
• Reseat the memory modules to ensure that your computer is successfully
communicating with the memory
(see "Memory" on page 137) .
• Ensure that you are following the memory installation guidelines (see
"Memory" on page 137) .
• Run the Dell Diagnostics (see "Dell Diagnostics" on page 87) .
Network Problems
Fill out the "Diagnostics Checklist" on page 163 as you complete these checks.
CAUTION:
Before you begin any of the procedures in this section, follow the
safety instructions in the Product Information Guide .
C HECK THE NETWORK CABLE CONNECTOR —
Ensure that the network cable is
firmly inserted into both the network connector on the back of the computer
and the network jack.
C HECK THE NETWORK LIGHTS ON THE NETWORK CONNECTOR —
No light
indicates that no network communication exists. Replace the network cable.
book.book Page 108 Tuesday, October 7, 2008 6:00 PM