manualshive.com logo in svg

Dell Latitude XT3, Руководство пользователя

Поделиться
Скачать
Dell Latitude XT3 Скачать руководство пользователя страница 10

NOTE: The color of your computer and certain components may appear differently 
than shown in this document.

To avoid damaging your computer, perform the following steps before you begin working 
inside the computer.

1.

Ensure that your work surface is flat and clean to prevent the computer cover from 

being scratched.

2.

Turn off your computer (see Turning Off Your Computer).

3.

If the computer is connected to a docking device (docked) such as the optional 

Media Base or Battery Slice, undock it.

CAUTION: To disconnect a network cable, first unplug the cable from your 
computer and then unplug the cable from the network device.

4.

Disconnect all network cables from the computer.

5.

Disconnect your computer and all attached devices from their electrical outlets.

6.

Close the display and turn the computer upside-down on a flat work surface.

NOTE: To avoid damaging the system board, you must remove the main 
battery before you service the computer.

7.

Remove the main battery.

8.

Turn the computer top-side up.

9.

Open the display.

10. Press the power button to ground the system board.

CAUTION: To guard against electrical shock, always unplug your computer 
from the electrical outlet before opening the display.

CAUTION: Before touching anything inside your computer, ground yourself by 
touching an unpainted metal surface, such as the metal at the back of the 
computer. While you work, periodically touch an unpainted metal surface to 
dissipate static electricity, which could harm internal components.

11. Remove any installed ExpressCards or Smart Cards from the appropriate slots.

Recommended Tools

The procedures in this document may require the following tools:

•

Small flat-blade screwdriver

•

#0 Phillips screwdriver

•

#1 Phillips screwdriver

•

Small plastic scribe

10

Содержание Latitude XT3




















































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды