NOTE: This step is applicable only for a 4-cell battery.
3.
Insert the battery into the slot on the computer.
4.
Tighten the screws to secure the battery to the computer.
5.
Connect the battery cable to the connector on the system board.
6.
Install the
base cover
.
7.
Follow the procedure in
After working inside your computer
.
Removing the hard drive assembly
1.
Follow the procedure in
Before working inside your computer
.
2.
Remove the:
a.
base cover
b.
battery
3.
To remove the hard drive assembly:
a. Disconnect the hard drive cable from the connector on the system board [1] .
b. Remove the screws that secure the hard drive assembly to the computer [2].
c. Lift the hard drive assembly away from the computer [3].
Removing the hard drive from the hard drive bracket
1.
Follow the procedure in
Before working inside your computer
.
2.
Remove the:
a.
base cover
b.
battery
c.
hard drive assembly
3.
Pull the hard drive cable to remove it from the connector.
9
