a.
base cover
b.
battery
3.
To remove the WWAN card:
a. Remove the screw that secures the WWAN card [1].
b. Disconnect the WWAN cables from the connectors on the WWAN card [2].
c. Unroute the WWAN cables from the routing channel.
d. Remove the WWAN card from the computer [3].
Installing the WWAN card
1.
Insert the WWAN card into the slot on the computer.
2.
Route the WWAN cables through the routing channel.
3.
Connect the WWAN cables to the connectors on the WWAN card.
4.
Tighten the screw to secure the WWAN card to the computer
5.
Install the:
a.
battery
b.
base cover
6.
Follow the procedure in
After working inside your computer
.
Removing the power connector port
1.
Follow the procedure in
Before working inside your computer
.
2.
Remove the:
a.
base cover
b.
battery
3.
To remove the power connector port:
a. Remove the screws to release the metal bracket on the power connector port [1].
b. Lift the metal bracket from the computer [2].
c. Remove the power connector port from the computer [3].
15
