c. Lift the heat sink assembly from the system board [8].
Installing the heat sink assembly
1.
Place the heat sink assembly on the system board and align it with the screw holders.
2.
Tighten the screws to secure the heat sink assembly to the system board.
3.
Connect the fan cable to the connector on the system board.
4.
Install the:
a.
dock frame
b.
WWAN
c.
WLAN
d.
hard drive assembly
or
M.2 SSD
or
PCIe SSD
e.
battery
f.
base cover
5.
Follow the procedure in
After working inside your computer
.
Removing the coin cell battery
1.
Follow the procedure in
Before working inside your computer
.
2.
Remove the:
a.
base cover
b.
battery
3.
To remove the coin cell battery:
a. Disconnect the coin cell battery cable from the connector on the system board [1].
b. Lift the coin cell battery to release it from the adhesive and remove it from the system board [2].
28