Back to Contents Page
Speaker Assembly
Dell Latitude E4310 Service Manual
Removing the Speaker Assembly
1.
Follow the procedures in
Before Working Inside Your Computer
.
2.
Remove the
battery
.
3.
Remove the
ExpressCard
.
4.
Remove the
hard drive assembly
.
5.
Remove the
hinge covers
.
6.
Remove the
mini card door
.
7.
Remove the
LED covers
.
8.
Remove the
keyboard
.
9.
Remove the
display assembly
.
10.
Remove the
palm rest
.
11.
Remove the
smart card cage
.
12.
Remove the
display closure sensor
.
13.
Release the display closure sensor cable from its routing path on the computer.
14.
Remove the screws that secure the speaker assembly to the computer.
15.
Disconnect the speaker cable from the system board and release the cable from its routing guides on the computer.
16.
Lift up the speaker assembly from the computer.
Replacing the Speaker Assembly
To replace the speaker assembly, perform the above steps in reverse order.
Back to Contents Page
WARNING:
Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
NOTE:
You may need to install Adobe Flash Player from
Adobe.com
in order to view the illustrations below.