Back to Contents Page
Display Closure Sensor
Dell Latitude E4310 Service Manual
Removing the Display Closure Sensor
1.
Follow the procedures in
Before Working Inside Your Computer
.
2.
Remove the
battery
.
3.
Remove the
ExpressCard
.
4.
Remove the
hard drive assembly
.
5.
Remove the
hinge covers
.
6.
Remove the
mini card door
.
7.
Remove the
LED covers
.
8.
Remove the
keyboard
.
9.
Remove the
display assembly
.
10.
Remove the
palm rest
.
11.
Remove the screw that secures the display closure sensor to the computer.
12.
Lift up and turn over the display closure sensor.
13.
Disconnect the cable from the display closure sensor and remove it from the computer.
Replacing the Display Closure Sensor
To replace the display closure sensor, perform the above steps in reverse order.
Back to Contents Page
WARNING:
Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
NOTE:
You may need to install Adobe Flash Player from
Adobe.com
in order to view the illustrations below.