Dell Latitude D631, Руководство пользователя, Страница: 114 / 184

114
Adding and Replacing Parts
1 Follow the instructions in "Before You Begin" on page 111.
2 Remove the hinge cover (see "Hinge Cover" on page 113).
NOTICE:
The keycaps on the keyboard are fragile, easily dislodged, and time-consuming to replace. Be careful
when removing and handling the keyboard.
3 Remove the three screws across the top of the keyboard.
NOTE:
Lift the keyboard carefully in step 4 to ensure that you do not pull on the keyboard cable.
4
Rotate the keyboard up 90-degrees and lay it on the palm rest to gain access to the keyboard connector.
5 If the keyboard cable is held in place by a keyboard lock arm next to the keyboard connector, carefully
pivot the lock arm upward to uncover the cable.
6 Pull up on the pull-tab to disconnect the keyboard cable connector from the keyboard connector on the
system board.
NOTE:
When you replace the keyboard, ensure that the keyboard tabs are completely in place to avoid scratching
the palm rest.
1
screws (3)
2
keyboard tabs (5)
3
palm rest
4 pull-tab 5 keyboard-cable locking arm 6 keyboard cable connector
2
1
3
4
5
6