Dell Latitude 9410, Руководство по установке и техническим характеристикам

Страница: 32 / 42

Option Description
• Disabled —Default
• Every Day
• Weekdays
• Select Days
This option is not set by default.
USB Wake Support
Allows you to enable USB devices to wake the system from standby.
• Enable USB Wake Support
• Wake on Dell USB-C Dock
This option is not set by default.
Wireless Radio Control
This option if enabled, will sense the connection of the system to a wired network and subsequently
disable the selected wireless radios (WLAN and/or WWAN). Upon disconnection from the wired network
the selected wireless radio will ne enabled.
• Control WLAN radio
This option is not set by default.
Block Sleep
This option lets you to block entering to sleep in operating system environment.
This option is not set by default.
Peak Shift
Allows you enable of disable the Peak shift feature. This feature when enabled, minimizes the AC power
usage at times of peak demand. Battery does not charge between the Peak Shift start and end time.
Peak Shift Start and End Time can be configured for all weekdays
This option set the battery threshold value (15% to 100%)
Advanced Battery Charge
Configuration
This option enables you to maximize the battery health. By enabling this option, your system uses the
standard charging algorithm and other techniques during the non-work hours to improve the battery
health.
Advanced Battery Charge Mode can be configured for all weekdays
Primary Battery Charge
Configuration
Allows you to select the charging mode for the battery.
The options are:
• Adaptive —Default
• Standard —Fully charges your battery at a standard rate.
• ExpressCharge —The battery charges over a shorter period of time using Dell’s fast charging
technology.
• Primarily AC use
• Custom
If Custom Charge is selected, you can also configure Custom Charge Start and Custom Charge Stop.
NOTE: All charging modes may not be available for all the batteries.
Post behavior
Table 31. POST Behavior
Option Description
Adapter Warnings
Allows you to enable or disable the system setup (BIOS) warning messages when you use certain power
adapters.
• Enable Adapter Warnings —Default
Numlock Enable
Allows you to enable or disable the Numlock function when the system boots.
32 System setup