Installing battery
1
Insert the battery into the slot on the computer.
2
Connect the battery cable to the connector on the system board.
3
Replace the 4 (M1.98 x 4L) screws to secure the battery to the computer.
4
Install the:
a
b
c
NOTE:
To install both cards if equipped.
5
Follow the procedure in
After working inside your computer
.
PCIe Solid State Drive (SSD)
Removing the NVMe SSD card
1
Follow the procedure in
Before working inside your computer
.
2
Remove:
a
b
NOTE:
To remove both cards if equipped and no need to remove the blank filler
c
d
3
To remove the NVMe SSD card:
a Loosen the 2 (M2.0 x 3.0) screws that secure SSD thermal plate in place [1].
Removing and installing components
11
