7
Remove the two (M2.0 x 5.0) screws that secure the USB Type-C bracket.
8
Flip the system board, peel off the tapes securing the bracket and remove the USB Type-C port from the system board.
NOTE:
When removing or reinstalling the USB Type-C bracket to the system board, technicians must place the system
board on an ESD mat to avoid damage.
Installing system board
1
Align the system board with the screw holders on the system.
2
Replace the M2.0 x 5.0 screws to secure the system board to the system.
3
Connect the speaker, LED board, coin cell battery, touchpad, and USH cables, and power connector, cables to the connectors on the
system board.
4
Connect the eDP cable to the connector on the system board.
Removing and installing components
37
Содержание Latitude 7290
