Dell Latitude 7210 2-in-1, Руководство по обслуживанию, Страница: 79 / 89

Power Management screen options
Option Description
AC Behavior Allows you to enable or disable the computer from turning on automatically when an AC adapter is connected.
Wake on AC This option is disabled by default.
Enable Intel Speed
Shift Technology Allows you to enable or disable the Intel speed Shift Technology support. Setting to enable option, allows the
operating system to automatically select the required processor performance.
Enable Intel Speed Shift Technology This option is enabled by default.
Auto On Time Allows you to set the time at which the computer must turn on automatically. The options are:
• Disabled This option is enabled by default.
• Every Day
• Weekdays
• Select Days
USB Wake
Support Does not allow this option.
Lid Switch Allows this option.
Thermal
Management Allows this option..
Wireless Radio
Control
Allows you to sense the connection of the system to a wired network and subsequently disable the selected
wireless radios (WLAN and/or WWAN)
Upon disconnection from the wired network, the selected wireless radios is re-enabled. By default none of the
option is enabled. The options are:
• Control WLAN radio
• Control WWAN radio
Wake on WLAN Allows you to enable or disable the feature that powers on the computer from the Off state when triggered by a
LAN signal.
• Disabled This option is selected by default.
• LAN with PXE Boot
• LAN Only
Peak Shift Allows you to minimize the AC power consumption during the peak power times of day. After you enable this
option, your system runs only in battery even if the AC is attached.
• Enable Peak Shift This option is not selected by default.
Advanced Battery
Charge
Configuration This option enables you to maximize the battery health. By enabling this option, your system uses the standard
charging algorithm and other techniques, during the non-work hours to improve the battery health.
• Enable Advanced Battery Charge Mode This option is not selected by default.
Primary Battery
Charge
Configuration Allows you to select the charging mode for the battery. The options are:
• Adaptive This option is enabled by default.
• Standard Fully charges your battery at a standard rate.
• ExpressCharge The battery charges over a shorter period of time using Dell’s fast charging technology.
• Primarily AC use
• Custom
If Custom Charge is selected, you can also configure Custom Charge Start and Custom Charge Stop.
NOTE: All charging mode may not be available for all the batteries. To enable this option, disable
the Advanced Battery Charge Configuration option.
System setup 79