Dell Latitude 5290 Скачать руководство пользователя страница 71

Страница: 71 / 90

Option

Description

This option is not set by default.

Enable Intel Speed Shift
Technology

Allows you to enable or disable Enable Intel Speed Shift Technology support.

•

Enable Intel Speed Shift Technology

This option is set by default.

Auto On Time

Allows you to set the time at which the computer must turn on automatically.

Click one of the following options:

•

Disabled

—Default

•

Every Day

•

Weekdays

•

Select Days

USB Wake Support

Allows you to enable USB devices to wake the system from standby.

•

Enable USB Wake Support

•

Wake on Dell USB-C Dock

—Default

Wireless Radio Control

Allows you to enable or disable the feature that automatically switches from wired or wireless networks

without depending on the physical connection.

•

Control WLAN Radio

•

Control WWAN Radio

This option is not set by default.

Wake on LAN/WLAN

This option allows the computer to power up from the off state when triggered by a special LAN signal.

Wake-up from the Standby state is unaffected by this setting and must be enabled in the operating

system. This feature only works when the computer is connected to AC power supply.

•

Disabled

- Does not allow the system to power on by special LAN signals when it receives a wake-up

signal from the LAN or wireless LAN.

•

LAN Only

- Allows the system to be powered on by special LAN signals.

•

WLAN

- Allows the system to be powered on by special LAN signals.

•

LAN or WLAN

- Allows the system to be powered on by special LAN or wireless LAN signals.

Default setting: Disabled

Block Sleep

Allows you to block entering to sleep(S3 state) in OS Environment.
This option is not set by default.

Peak Shift

This option enables you to minimize the AC power consumption during the peak power times of day. After
you enable this option, your system runs only in battery even if the AC is attached.

Advanced Battery Charge
Configuration

This option enables you to maximize the battery health. By enabling this option, your system uses the

standard charging algorithm and other techniques, during the non-work hours to improve the battery

health.

•

Enable Advanced Battery Charge Mode

This option is not set by default.

Primary Battery Charge
Configuration

Allows you to select the charging mode for the battery. The options are:

•

Adaptive

—Default

•

Standard

•

ExpressCharge

System Setup

Содержание Latitude 5290



























































































Результаты поиска

Содержание Latitude 5290

Отзывы:

Похожие инструкции для Latitude 5290

Бренды по названию

Популярные бренды

Dell Latitude 5290, Руководство пользователя

Результаты поиска

Содержание Latitude 5290

Отзывы:

Похожие инструкции для Latitude 5290

Бренды по названию

Популярные бренды