2. Remove the:
a.
NOTE:
Micro-SIM card slot is available only on tablets shipping with WWAN module.
b.
3. To remove the front camera:
a. Remove the conductive tape covering the camera module, heatsink, antenna and shielding cover [1].
b. Gently pry and lift the shielding cover covering the front camera[2].
c. Use a plastic scribe to pry and disconnect the front camera cable [3]
NOTE:
Ensure to peel off the adhesive tape that secures the front camera to the rear camera. The front camera
cable is glued to the rear camera, ensure to gently peel off, to remove the screw that secures the rear camera to the
system board.
d. Remove the M1.6 x 3.0 screws securing the front camera module to the system chassis [4].
e. Peel off and lift the front camera module from the tablet [5].
Installing the front camera
1. Insert the camera module into the slot on the tablet.
2. Replace the M1.6 x 3.0 screws to secure the front camera module.
3. Connect the front camera cable to the system board.
NOTE:
Affix the adhesive tape that secures the front camera to the rear camera.
4. Place the shielding cover to secure the front camera module.
NOTE:
Handle the covering shield with care else it may break.
5. Affix the conductive tape covering the camera module, heatsink, antenna and shielding cover.
Using your tablet
29
