Removing and Installing Parts
57
4
Secure the card bracket with the screw you removed in step 2.
5
Connect any cables that should be attached to the card.
See the documentation for the card for information about the card’s cable connections.
NOTICE:
Do not route card cables over or behind the cards. Cables routed over the cards can cause
damage to the equipment.
6
If you installed a sound card:
a
Enter system setup (see page 82), select
Audio Controller
, and then change the setting
to
Off
.
b
Connect external audio devices to the sound card’s connectors. Do not connect external
audio devices to the microphone, speaker/headphone, or line-in connectors on the back
panel.
7
If you installed an add-in network adapter and want to disable the integrated network
adapter:
a
Enter system setup (see page 82), select
Network Controller,
and then change the setting
to
Off
.
b
Connect the network cable to the add-in network adapter’s connectors. Do not connect
the network cable to the integrated connector on the back panel.
8
Install any drivers required for the card as described in the card documentation.
fully seated card
not fully seated card
bracket caught
outside of slot
bracket
within slot
Содержание Latitude 3000 Series
Страница 32: ...32 Solving Problems w w w d e l l c o m s u p p o r t d e l l c o m ...
Страница 45: ...Removing and Installing Parts 45 Front and Back View of the Computer Front View 1 2 9 3 4 8 6 5 10 7 ...
Страница 78: ...78 Removing and Installing Parts w w w d e l l c o m s u p p o r t d e l l c o m ...
