2
Removing and Installing Components
This section provides detailed information on how to remove or install the components from your
computer.
Removing the Stylus and Tether
1.
Follow the procedures in
Before Working Inside Your Computer
2.
To remove stylus and tether:
a. Pull the stylus out from it’s slot on the computer [1].
b. Release and remove the tether from the computer [2].
Installing the Stylus and Tether
1.
Insert the tether into the slot on the computer
2.
Insert the stylus into its slot and push it inwards.
3.
Follow the procedures in
After Working Inside Your computer
.
Removing the Battery
WARNING: Using an incompatible battery may increase the risk of fire or explosion. Replace the
battery only with a compatible battery purchased from Dell. The battery is designed to work with
your Dell computer. Do not use a battery from other computers with your computer.
WARNING: Using an incompatible battery may increase the risk of fire or explosion. Replace the
battery only with a compatible battery purchased from Dell. The battery is designed to work with
your Dell computer. Do not use a battery from other computers with your computer.
WARNING: Not for use in hazardous locations. See installation instructions.
8
