Matchprint Professional Server IIx for Xerox: Hardware Installation and Startup
2003 Kodak Polychrome Graphics. All rights reserved.
Page 7 of 36
Introduction
This document is a guide to setting up the Matchprint Professional Server, connecting to a Xerox
DocuColor 12 Copier/Printer, and performing a basic calibration test to confirm the hardware and cabling
are functioning properly. This document covers:
•
Unpacking the Matchprint Professional Server IIx
•
Inspecting the Matchprint Professional Server hardware for loose components or shipping
damage
•
Setting up and cabling
•
System startup and software initialization
•
Calibrating the printer to test the Matchprint Professional Server hardware by printing and
scanning the calibration test page.
Unpacking
The Matchprint Professional Server comes in three boxes. The optional cart comes in a fourth box.
Server and Monitor
Cart (optional)
Unpack the
Matchprint Professional Server
according to the following instructions.
A graphic on the top of the smaller box shows how it should be unpacked.
The steps that follow show this in greater detail.
