Dell Inspiron One 2330 Скачать руководство пользователя страница 2

Страница: 2 / 158

Notes, Cautions, and Warnings

NOTE:

A NOTE indicates important information that helps you make better use of

your computer.

CAUTION:

A CAUTION indicates potential damage to hardware or loss of data if

instructions are not followed.

WARNING:

A WARNING indicates a potential for property damage, personal

injury, or death.

____________________

Information in this document is subject to change without notice.

Reproduction of these materials in any manner whatsoever without the written permission of Dell Inc.
is strictly forbidden.

Trademarks used in this text: Dell™, the DELL logo, and Inspiron

™

are trademarks of Dell Inc.;

Microsoft

, Windows

, and the Windows start button logo

are either trademarks or registered

trademarks of Microsoft corporation in the United States and/or other countries; Bluetooth

is a

registered trademark owned by Bluetooth SIG, Inc. and is used by Dell under license; Intel

and Intel

SpeedStep

are registered trademarks of Intel Corporation in the U.S. and/or other countries.

Other trademarks and trade names may be used in this document to refer to either the entities claiming
the marks and names or their products. Dell Inc. disclaims any proprietary interest in trademarks and
trade names other than its own.

2012 - 03

Rev. A00

OM_Book.book Page 2 Friday, March 30, 2012 1:21 PM

Содержание Inspiron One 2330































































































































































Результаты поиска

Содержание Inspiron One 2330

Отзывы:

Dell Inspiron One 2330, Руководство пользователя, Страница: 2 / 158

Результаты поиска

Содержание Inspiron One 2330

Отзывы: