Dell Inspiron Mini 9 910 Скачать руководство пользователя

Страница: 4 / 38

Ensure that the work surface is flat and clean to prevent the computer cover from being scratched.

Turn off your computer (see

If the computer is connected to a docking device (docked), undock it. See the documentation that came with your docking device for instructions.

Press and eject any installed cards from the 3-in-1 memory card reader.

Disconnect all telephone or network cables from the computer.

Disconnect your computer and all attached devices from their electrical outlets.

Turn the computer over.

Slide the battery-bay release latch and the battery-lock latch towards the outer edges.

Slide the battery out of the battery bay.

10.

Turn the computer top-side up, open the display, and press the power button to ground the system board.

Back to Contents Page

NOTICE:

To avoid damaging the computer, perform the following steps before you begin working inside the computer.

NOTICE:

To disconnect a network cable, first unplug the cable from your computer and then unplug the cable from the network device.

NOTICE:

To help prevent damage to the system board, you must remove the battery from the battery bay before you service the computer.

NOTICE:

To avoid damage to the computer, use only the battery designed for this particular Dell computer. Do not use batteries designed for other Dell

computers.

battery-bay release latch

battery

battery-lock latch

Содержание Inspiron Mini 9 910







































Результаты поиска

Содержание Inspiron Mini 9 910

Отзывы:

Похожие инструкции для Inspiron Mini 9 910

Бренды по названию

Популярные бренды

Dell Inspiron Mini 9 910, Руководство по обслуживанию

Результаты поиска

Содержание Inspiron Mini 9 910

Отзывы:

Похожие инструкции для Inspiron Mini 9 910

Бренды по названию

Популярные бренды