Dell Inspiron Mini 9 910 Скачать руководство пользователя

Страница: 14 / 38

Disconnect the display cables and the speaker cable from the respective system board connectors.

Make note of the display cables and the speaker cable routing and carefully dislodge from their routing guides as shown in the figure.

Remove the two screws from the display assembly hinges.

10.

Remove the display assembly from the computer base.

Replacing the Display Assembly

Align the display hinges with the holes in the base of the computer and then lower the display into place.

Replace and tighten the two display assembly hinge screws.

Carefully route the display cables and the speaker cable into their routing guides and connect them to the respective system board connectors.

Carefully slide the Mini-Card antenna cables through the system board and into their routing guides.

Replace the palm rest (see

Replacing the Palm Rest

Replace the keyboard (see

Replacing the Keyboard

Replace the module cover (see

Replacing the Module Cover

Slide the battery into the battery bay, until it clicks in place and slide the battery-lock latch towards the lock position.

display cables

Mini-Card antenna cables

speaker cable

display cable connectors

screw (2)

speaker cable connector

Содержание Inspiron Mini 9 910







































Результаты поиска

Содержание Inspiron Mini 9 910

Отзывы:

Похожие инструкции для Inspiron Mini 9 910

Бренды по названию

Популярные бренды

Dell Inspiron Mini 9 910, Руководство по обслуживанию

Результаты поиска

Содержание Inspiron Mini 9 910

Отзывы:

Похожие инструкции для Inspiron Mini 9 910

Бренды по названию

Популярные бренды