8.
Ease the keyboard up and slide the six tabs at the bottom of the keyboard out of the slots on the palm rest.
9.
Without pulling hard on the keyboard, turn it over.
10.
Lift the connector latch and pull the pull-tab to disconnect the keyboard cable from the connector on the system board.
11.
Lift the keyboard off the computer.
Replacing the Keyboard
1.
Follow the instructions in
Before You Begin
.
2.
Slide the keyboard cable into the connector on the system board and press down on the connector latch to secure the cable.
3.
Slide the six tabs at the bottom of the keyboard into the slots on the palm rest.
4.
Gently press around the edges of the keyboard to secure the keyboard under the tabs on the palm rest and slide the keyboard upwards.
5.
Replace the screw that secures the keyboard to the computer base.
1 palm rest tabs (4)
2 plastic scribe
3 keyboard
1
connector latch
2
keyboard tabs (6)
NOTE:
The screw that secures the keyboard to the computer base may not be present in all computers.
Содержание Inspiron M5010
Страница 3: ...Back to Contents Page ...
Страница 27: ...Back to Contents Page ...
Страница 45: ...Back to Contents Page ...
