Dell INSPIRON Inspiron 5000 Скачать руководство пользователя страница 92 | Manualshive

Страница: 92 / 100

background image

BIOS setup program

Entering BIOS setup program

Before turning on the Embedded Box PC, connect the keyboard, mouse, and monitor to the Embedded Box PC, or connect the
Embedded Box PC through the KVM session or use Dell Wyse Cloud Client Manager (CCM) or Dell Command | Monitor (DCM) to update
the BIOS configuration.

1. Turn on (or restart) the Embedded Box PC.
2. During POST, when the DELL logo is displayed, watch for the F2 prompt to appear, and then press F2 immediately.

NOTE:

The F2 prompt indicates that the keyboard is initialized. This prompt can appear very quickly, so you must

watch for it, and then press F2. If you press F2 before the F2 prompt, this keystroke is lost. If you wait too long and
the operating system logo appears, continue to wait until you see the desktop. Then, restart the Embedded Box PC
and try again.

Clearing forgotten passwords

NOTE:

The Embedded Box PC must be disconnected from the electrical outlet to clear the password setting.

1. Follow step 1 to step 6 in “

Removing the back cover

”.

2. Locate the password reset jumper (PWD) on the system board. See “

System-board components

”.

3. Move the jumper plug from pins 1 and 2 to 2 and 3.
4. Follow step 2 to step 9 in “

Replacing the back cover

”.

5. Turn on the Embedded Box PC, and wait until the message stating that the password has been cleared appears.
6. Shut down the Embedded Box PC.
7. Move the jumper plug from pins 2 and 3 and replace it on pins 1 and 2.

55

92

BIOS setup program

«
...
90
91
92
93
94
...
»

Содержание INSPIRON Inspiron 5000





































































































Отзывы:

Нет отзывов

Похожие инструкции для INSPIRON Inspiron 5000

Бренд: BAC Страницы: 24

Бренд: Tandy Страницы: 82

Deep Silence 6 Revision B

Бренд: Nanoxia Страницы: 24

Бренд: Advantech Страницы: 68

Бренд: Sun Microsystems Страницы: 45

Бренд: Vivo Страницы: 5

Бренд: JNC Страницы: 60

Бренд: Updesk Страницы: 2

Бренд: Corvus systems Страницы: 191

Бренд: DAP Technologies Страницы: 12

MICROFLEX CE8000

Бренд: DAP Technologies Страницы: 62

Бренд: LEXIBOOK Страницы: 5

Бренд: IEI Technology Страницы: 14

Бренд: U-Line Страницы: 3

Бренд: Yawarra Страницы: 4

CX PRINT SERVER 550

Бренд: Xerox Страницы: 188

Бренд: PRÜFTECHNIK Страницы: 30

Бренд: Quanmax Страницы: 33

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды