Dell INSPIRON Inspiron 5000, Руководство по обслуживанию

Страница: 10 / 100

CAUTION: Press and eject any installed card from the media-card reader.
Recommended tools
The procedures in this document may require the following tools:
• Philips screwdriver
• Flat-head screwdriver
• Plastic scribe
• Hex screwdriver
• 8 mm open wrench
• 10 mm open wrench
Screw list
The following table provides the list of screws used for securing different components to the Embedded Box PC.
Component Secured to Screw type Quantity
Logo board Front chassis M3x5 3
Left chassis Front chassis M3x6 7
Right chassis Front chassis M3x6 7
System board Front chassis M3x5 9
Front chassis STDF(L8) HEX, M3x4 5
Front chassis STDF(L15) HEX, M3x4 1
CPU board System board STDF(L5) HEX, M2.5x4 3
System board M2.5x6 2
Heat sink CPU board M3x8 4
Left chassis M3x16 4
Right chassis M3x16 4
Riser card Riser card bracket M3x5 2
Riser card Right chassis M3x5 countersunk 2
WLAN card Carrier board M2x3 2
WWAN card Carrier board M2x3 2
PCI cover Top PCI plate M3x5 countersunk 1
PCI cover Top PCI plate M3x5 countersunk 1
PCI bracket Top PCI plate M3x5 countersunk 1
DC-in connector Top PCI plate M2.5x6 2
Intrusion switch Intrusion-switch bracket M2x10 1
Top PCI plate M3x5 countersunk 1
VGA connector Top PCI plate D-sub HEX, #4–40UNCx6.3 2
CANbus cable Top PCI plate D-sub HEX, #4–40UNCx6.3 2
Top I/O plate Main chassis M3x5 countersunk 7
COM port cable Bottom I/O plate D-sub HEX, #4–40UNCx6.3 8
Bottom I/O plate Main chassis M3x5 countersunk 7
Rubber foot Back cover M3x8 4
Back cover Main chassis M3x5 countersunk 5
10 Before working inside your Embedded Box PC