Dell Inspiron 8200 Скачать руководство пользователя страница 99

Страница: 99 / 164

Before You Begin: Dell Inspiron 8200

5. Disconnect the computer from the electrical outlet.

6. To avoid possible damage to the system board, wait 10 to 20 seconds and then

disconnect any attached devices.

7. Disconnect all other external cables from the computer.

8. Remove any installed PC Cards or plastic blanks from the PC Card slot.

9. Close the display and turn the computer upside down on a flat work surface.

10. Remove the battery from the battery bay.

NOTICE:

To avoid component damage, always remove any installed batteries

before you service the computer.

11. Remove any device installed in the module bay.

12. To dissipate static electricity while you work, periodically touch an unpainted

metal surface on the computer chassis.

13. Handle components and cards by their edges, and avoid touching pins and

contacts.

Recommended Tools

The procedures in this document require the following tools:

●

#1 magnetized Phillips screwdriver

●

Small flat-blade screwdriver

●

Microprocessor extractor

●

Nonmarring plastic scribe

●

Flash BIOS update program floppy disk or CD (provided when needed to

upgrade the BIOS)

file:///F|/Service%20Manuals/Dell/Inspiron/8200/begin.htm (2 of 6) [2/28/2004 7:40:48 AM]

Содержание Inspiron 8200





































































































































































Результаты поиска

Содержание Inspiron 8200

Отзывы:

Бренды по названию

Популярные бренды

Dell Inspiron 8200, Руководство пользователя

Результаты поиска

Содержание Inspiron 8200

Отзывы:

Бренды по названию

Популярные бренды