Dell Inspiron 8200 страница 24 Скачать руководство пользователя

Страница: 24 / 164

Solving Problems: Dell Inspiron 8200

batteries may cause you to receive a WARNING or a SYSTEM CONFIGURATION ERROR

message similar to the following:

WARNING: 70 Watt AC adapter detected. System will not be capable of

running in full performance without a 90 Watt AC adapter.

NOTICE:

Do not use an AC adapter rated under 70 W or a battery rated under

3600 mAh in this computer. To do so will cause indeterminate results, including

data loss and/or immediate system shutdown. Using one of these lower-

powered components will cause a

SYSTEM CONFIGURATION ERROR

message to

appear.

Docking Power Considerations

HINT:

If you want to upgrade the AC adapter for an existing Dell docking

device, you can purchase an additional 90-W AC adapter from Dell.

The 4400-mAh battery supplied with the computer is not designed to support both the

computer and a docking device. For optimum system performance, always use the 90-

W AC adapter (with or without a battery installed) when using the computer in a

docking device. You can identify the 90-W adapter by the lighter-gray tip on the

connector that plugs into the computer or docking device.

Using a 70-W AC adapter will cause the computer to run in reduced-performance

mode and may display an AC adapter WARNING message.

Docking While the Computer Is Running

To accommodate the initial power surge when connecting to a docking device with the

computer running in normal (non-power conservation) mode, a 90- or 70-W AC

adapter and at least one battery (a 4400- or 3800-mAh battery) must be installed in

the computer. The computer will then run in either full-performance or reduced-

performance mode, depending on the battery/AC adapter combination installed.

AC Power Loss While the Computer Is Docked

If a computer loses AC power while docked, the computer immediately goes into low-

performance mode and displays an appropriate WARNING message.

file:///F|/Service%20Manuals/Dell/Inspiron/8200/solving.htm (4 of 26) [2/28/2004 7:40:15 AM]

Содержание Inspiron 8200





































































































































































Результаты поиска

Содержание Inspiron 8200

Отзывы:

Похожие инструкции для Inspiron 8200

Бренды по названию

Популярные бренды

Dell Inspiron 8200, Руководство пользователя

Результаты поиска

Содержание Inspiron 8200

Отзывы:

Похожие инструкции для Inspiron 8200

Бренды по названию

Популярные бренды