1. Slide the I/O board into the slots on the palm-rest and keyboard assembly.
2. Align the screw hole on the I/O board with the screw hole on the palm-rest and keyboard assembly.
3. Replace the screw (M2x3.5) that secures the I/O board to the palm-rest and keyboard assembly.
4. Connect the I/O-board cable to the connector on the I/O board and close the latch to secure the cable.
5. Adhere the tape that secures the I/O-board cable to the I/O board.
6. Connect the fingerprint reader-cable to the connector on the I/O board and close the latch to secure the cable.
7. Connect the coin-cell battery cable to the I/O board.
8. Close the left display hinge.
9. Replace the three screws (M2.5x4.5) that secure the left-display hinge to the palm-rest and keyboard assembly.
1. Install the
.
After working inside your computer
.
Touchpad
Removing the touchpad
Before working inside your computer
.
2. Remove the
.
3. Remove the
.
The following image indicates the location of the touchpad and provides a visual representation of the removal procedure.
Removing and installing components
35
Содержание Inspiron 7706
Страница 12: ...12 Removing and installing components ...
Страница 38: ...38 Removing and installing components ...