Replacing the Display Assembly |
41
Replacing the Display Assembly
WARNING: Before working inside your computer, read the safety information
that shipped with your computer and follow the steps in "Before Working Inside
Your Computer" on page 7. After working inside your computer, follow the
instructions in "After Working Inside Your Computer" on page 9.
For more safety best practices, see the Regulatory Compliance home page at
dell.com/regulatory_compliance.
Procedure
1
Place the display assembly on the palm-rest assembly.
2
Align the screw holes on the display hinges with the screw holes on the palm-rest
assembly.
3
Replace the screws that secure the display hinges to the palm-rest assembly.
4
Route the camera and touch-panel cable through the routing guides on the
palm-rest assembly.
5
Connect camera and touch-panel cable to the system board.
6
Connect display cable to system board.
7
Adhere the tape to secure the display cable.
1
display assembly
2
palm-rest assembly
1
2
