Replacing the Coin-Cell Battery |
19
Replacing the Coin-Cell Battery
WARNING: Before working inside your computer, read the safety information
that shipped with your computer and follow the steps in "Before Working Inside
Your Computer" on page 7. After working inside your computer, follow the
instructions in "After Working Inside Your Computer" on page 9.
For more safety best practices, see the Regulatory Compliance home page at
dell.com/regulatory_compliance.
WARNING: The battery may explode if installed incorrectly. Replace the battery
only with the same or equivalent type. Discard used batteries according to the
manufacturer’s instructions.
Procedure
1
Place the coin-cell battery into its position on the palm-rest assembly.
2
Route the coin-cell cable through the routing guides on the palm-rest assembly.
3
Connect the coin-cell battery cable to the system board.
4
Follow step 3 and step 4 from "Replacing the Speakers" on page 15.
Postrequisites
1
Replace the battery. See "Replacing the Battery" on page 13.
2
Replace the base cover. See "Replacing the Base Cover" on page 11.
