Dell Inspiron 7300 2n1 Black Скачать руководство пользователя страница 39 | Manualshive

Страница: 39 / 66

Dell Inspiron 7300 2n1 Black Скачать руководство пользователя страница 39

Installing the power-button with fingerprint reader

Prerequisites

If you are replacing a component, remove the existing component before performing the installation process.

About this task

The following image(s) indicate the location of the power-button with fingerprint reader and provides a visual representation of the
installation procedure.

Steps

1. Place the power-button with fingerprint reader into the slot on the palm-rest assembly.
2. Replace the screw (M2x3) that secures the power-button with fingerprint reader to the palm-rest assembly.
3. Adhere the tape that secures the power-button with fingerprint reader cable to the palm-rest assembly.
4. Connect the power-button with fingerprint-reader cable to the power-button board and close the latch.
5. Adhere the tape that secures the power-button with fingerprint reader cable to the palm-rest assembly.
6. Place the power-button bracket on the power-button with fingerprint reader.
7. Replace the screw (M2x3) that secures the power-button bracket to the palm-rest assembly.

Next steps

.

4. Follow the procedure in

After working inside your computer

.

Removing and installing components

39

«
...
37
38
39
40
41
...
»

Содержание Inspiron 7300 2n1 Black



































































Отзывы:

Нет отзывов