manualshive.com logo in svg

Dell Inspiron 7300 2n1 Black, Руководство по обслуживанию, Страница: 38 / 66

Поделиться
Скачать
Dell Inspiron 7300 2n1 Black Скачать руководство пользователя страница 38

Steps

1. Place the heat sink on the system board.
2. In sequential order (1>2>3>4) tighten the four captive screws that secure the heat sink to the system board.

Next steps

1. Install the 

base cover

.

2. Follow the procedure in 

After working inside your computer

.

Power button with fingerprint reader

Removing the power-button with fingerprint reader

Prerequisites

1. Follow the procedure in 

Before working inside your computer

.

2. Remove the 

base cover

.

3. Remove the 

fan

.

4. Remove the 

I/O board

.

About this task

The following image(s) indicate the location of the power-button with fingerprint reader and provides a visual representation of the
removal procedure.

Steps

1. Remove the screw (M2x3) that secures the power-button bracket to the palm-rest assembly.
2. Lift the power-button bracket off the palm-rest assembly.
3. Open the latch and disconnect the power-button with fingerprint reader cable from the power-button board.
4. Remove the screw (M2x3) that secures the power-button with fingerprint reader to the palm-rest assembly.
5. Peel the tape that secures the power-button with fingerprint reader cable to the palm-rest assembly.
6. Lift the power-button and fingerprint reader and its cable off the palm-rest assembly.

38

Removing and installing components

Содержание Inspiron 7300 2n1 Black



































































Отзывы:

Нет отзывов