manualshive.com logo in svg

Dell Inspiron 7300 2n1 Black, Руководство по обслуживанию, Страница: 14 / 66

Поделиться
Скачать
Dell Inspiron 7300 2n1 Black Скачать руководство пользователя страница 14

Steps

1. Connect the battery cable to the system board.
2. Align the tabs on the base cover with the slots on the palm-rest assembly and snap the base cover to the palm-rest assembly.
3. Replace the four screws (M2x4) that secure the base cover to the palm-rest assembly.
4. Tighten the three captive screws that secure the base cover to the palm-rest assembly.

Next steps

1. Follow the procedure in 

After working inside your computer

.

Battery

Lithium-ion battery precautions

CAUTION:

• Exercise caution when handling Lithium-ion batteries.
• Discharge the battery as much as possible before removing it from the system. This can be done by disconnecting

the AC adapter from the system to allow the battery to drain.

• Do not crush, drop, mutilate, or penetrate the battery with foreign objects.
• Do not expose the battery to high temperatures, or disassemble battery packs and cells.

14

Removing and installing components

Содержание Inspiron 7300 2n1 Black



































































Отзывы:

Нет отзывов