manualshive.com logo in svg

Dell Inspiron 5590, Руководство по обслуживанию, Страница: 57 / 81

Поделиться
Скачать
Dell Inspiron 5590 Скачать руководство пользователя страница 57

About this task

The following image indicates the location of the power button with fingerprint reader and provides a visual representation of the 
installation procedure.

Steps

1. Align and place the power button with fingerprint reader into the slot on the palm-rest and keyboard assembly.
2. Replace the two screws (M2x3) that secure the power button with fingerprint reader to the palm-rest and keyboard assembly.
3. Replace the two screws (M2x2) that secure the power button with fingerprint-reader bracket to the palm-rest and keyboard 

assembly.

4. Connect the fingerprint-reader cable to the connector on the power-button board.
5. Connect the power-button cable to the connector on the system board.
6. Close the right-display hinge and replace the three screws (M2.5x5) to secure the right display hinge to the palm-rest and keyboard 

assembly.

Next steps

1. Install the 

I/O board

.

2. Install the 

fan

.

3. Install the 

battery

.

4. Install the 

base cover

.

5. Follow the procedure in 

After working inside your computer

.

Removing and installing components

57

Содержание Inspiron 5590


















































































Отзывы:

Нет отзывов